How To use Linseed Oil To Polyurethane End

Linseed oil and polyurethane are each popular wooden finishes. Linseed oil is pressed from flax seeds, while polyurethane is a petroleum-based mostly product. Each produce a excessive gloss end on wooden and are considerably porous. Boiled linseed oil is more often used as an undercoat end on wood as it situations the wood while a high coat features to seal in the moisture. However, linseed oil can be used as a top coat with polyurethane in a process often called a “French Polish” where it features as a padding lacquer to apply a brand new finish over an old one.

Things You will Need
Rolled pad of cotton cloth

Test that the polyurethane end has not been heated and is not tacky to the touch.

Roll a mushy, clear cotton cloth into a pad that can match into your fist. Remove any free threads or pilling from the pad.

Soak the underside part of the pad in boiled linseed oil. Saturate pad with linseed oil but don’t let it drip.

Apply the pad to the wooden floor, utilizing a rocking motion of your hand and wrist. Apply extra linseed oil to the pad, and stroke the wood floor until the whole surface has been polished with the boiled linseed oil. Let the linseed oil dry for 24 hours.

Repeat all the software process four more instances, letting the wood dry for 24 hours in between each boiled linseed oil application. Polish the wooden floor to a excessive shine with a dry, clean cotton cloth.