Monthly Archives: May 2019

Composition of gasoline and diesel

Both gasoline and diesel fuel consist of hundreds of different hydrocarbon molecules. In addition, several bio-origin components, such as ethanol in gasoline blending, are common. Gasoline contains mainly alkanes (paraffins), alkenes (olefins), and aromatics. Diesel fuel consists mainly of paraffins, aromatics and naphthenes. The hydrocarbons of gasoline contain typically 4-12 carbon atoms with boiling range between [...]

By | May 31st, 2019|Categories: News|Tags: |0 Comments

The Benefits Of New Energy Efficient Lighting

The new energy efficient lighting system has a lot of benefits. Energy efficient lighting can solve prior and current issues. Energy should only be utilized to the extent so that the equal amount of energy can be produced. If we fail to produce the amount of energy consumed; energy shortage will take place which have very [...]

By | May 30th, 2019|Categories: News|0 Comments

The Chemistry of Diesel Fuel

Introduction Diesel fuel is a liquid fuel that is made from the byproduct of petroleum. Diesel fuel was originally supposed to be coal dust, but in 1895, Rudolf Diesel discovered the use of petroleum byproducts for liquid fuel in diesel engines. A commonly known example of diesel engines would be: school buses, construction machines, and public [...]

By | May 29th, 2019|Categories: News|Tags: |0 Comments

The difference between ordinary diesel and hydrogenated diesel

A1: Ordinary diesel oil is subjected to atmospheric pressure fractionation, and the produced diesel has high sulfur, nitrogen and oxygen content, high olefin content, and discoloration occurs when the vehicle is stationary for a short period of time. If the vehicle is used, it will affect the service life of the vehicle and will have a [...]

By | May 27th, 2019|Categories: News|Tags: |0 Comments

Coal Crusher Applied For The Station Boiler

Coal crusher applied for the station boilerStation boiler is a boiler providing steam to the turbine generator in thermal power plant, including boiler and ancillary equipment. Fuel is burned in the boiler and releases heat energy, and heat transfer through the metal wall of the boiler water into a certain pressure and temperature of superheated steam, [...]

By | May 26th, 2019|Categories: News|0 Comments

Light vs Heavy Crude Oil

Light Crude oil is liquid petroleum that has low density and that flows freely at room temperature. It has low viscosity, low specific gravity and high API gravity due to the presence of a high proportion of light hydrocarbon fractions. It generally has a low wax content as well. On the other hand, heavy crude oil [...]

By | May 26th, 2019|Categories: News|Tags: |0 Comments

Overview of Crude Oil Refining

The crude oil arrives at the oil refinery from the oil production offshore platform subsea pipeline landfall point, or from oil tankers. It will have most of the gas, water, and sand/grit removed by the production platform facilities before being processed at the crude oil refinery. On arrival at the refinery it is again subjected to dewatering [...]

By | May 24th, 2019|Categories: News|0 Comments

Heavy Fuel Oil (HFO)

The generic term heavy fuel oil (HFO) describes fuels used to generate motion and/or fuels to generate heat that have a particularly high viscosity and density. In the MARPOL Marine Convention of 1973, heavy fuel oil is defined either by a density of greater than 900 kg/m³ at 15°C or a kinematic viscosity of more than 180 mm²/s at 50°C. [...]

By | May 22nd, 2019|Categories: News|Tags: |0 Comments

Heating oil

Heating oil is a low viscosity, liquid petroleum product used as a fuel oil for furnaces or boilers in buildings. Home heating oil is often abbreviated as HHO.[1] Heating oil consists of a mixture of petroleum-derived hydrocarbons in the 14- to 20-carbon atom range that condense between 250 and 350 °C (482 and 662 °F) during oil refining. Heating oil condenses at a lower temperature than petroleum jelly, bitumen, candle wax, and lubricating oil, but at a [...]

By | May 20th, 2019|Categories: News|Tags: |0 Comments

Petroleum Production Phase

Production phase aims to the recovery of the reservoir fluids to surface followed by their processing. All production and maintenance activities are carried out to meet strict safety and environmental policies and procedures. During the production phase it is necessary to: control production and injection to meet up approved plans for volumes and quality of products [...]

By | May 19th, 2019|Categories: News|Tags: |0 Comments